Having a cracked Chromebook cover can be a major inconvenience, especially if you rely on your laptop for work or school. Fortunately, with the right tools and some patience, you can repair a cracked Chromebook cover relatively quickly and easily. In this article, we’ll provide step-by-step instructions on how to repair a cracked Chromebook cover and restore it to its former glory.
What You’ll Need to Repair Your Chromebook Cover
Before you attempt to repair your Chromebook cover, you’ll need to gather the necessary supplies. Here’s a quick list of what you’ll need:
- A Phillips screwdriver
- A pair of scissors
- A razor blade
- A fine-grit sandpaper
- Super glue
- A piece of plastic or vinyl sheeting that’s large enough to cover the cracked area
Step 1: Prepare the Chromebook Cover for Repair
The first step in repairing your Chromebook cover is to prepare it for the repair process. To do this, you’ll need to remove the screws that hold the cover in place. Using a Phillips screwdriver, remove all of the screws from the cover. Then, using a pair of scissors, carefully cut away any excess plastic or vinyl that may be protruding from the cracked area.
Step 2: Sand the Cracked Area
Once you’ve removed the screws and cut away any excess material, the next step is to sand the cracked area. Using a fine-grit sandpaper, sand the cracked area until it is smooth. This will help to ensure that the repair is as strong as possible.
Step 3: Apply Super Glue
Once you’ve sanded the cracked area, the next step is to apply super glue to the area. Using a razor blade, carefully spread the super glue over the cracked area. Make sure to cover the entire area and be sure to avoid any areas that are not cracked.
Step 4: Place the Plastic or Vinyl Sheet
After you’ve applied the super glue, the next step is to place the plastic or vinyl sheet over the cracked area. Using your fingers, press the sheeting down onto the super glue. Make sure that the sheeting is flush with the cover and that there are no gaps or air bubbles between the sheeting and the cover.
Step 5: Allow the Super Glue to Dry
Once you’ve applied the plastic or vinyl sheet, the next step is to allow the super glue to dry. Allow the super glue to dry for at least 24 hours before proceeding to the next step.
Step 6: Reattach the Screws
After the super glue has dried, the next step is to reattach the screws that you removed in step one. Using the Phillips screwdriver, reattach all of the screws to the cover.
Step 7: Enjoy Your Fully Repaired Chromebook Cover
Once all of the screws have been reattached, your Chromebook cover should be as good as new. Enjoy your fully repaired Chromebook cover!