Do you have a Kenmore gas stove and are unsure how to light it? We’ll walk you through the steps so you can start cooking safely and efficiently. Read on for instructions on how to light a Kenmore gas stove.
What You’ll Need
You won’t need much to light your Kenmore gas stove, just the following items:
- Strike-anywhere matches
- A long-handled lighter
Safety First
Before you light your Kenmore gas stove, it’s important to remember safety first. Make sure you’ve opened any windows or doors in the kitchen to ensure proper ventilation. In addition, make sure the room is free of any combustible materials. This includes fabrics, paper, and any other flammable materials. Finally, make sure you’re wearing clothing that can’t catch fire and be sure to remove any jewelry that could spark when you’re lighting the stove.
Step 1: Turn on the Gas
The first step in learning how to light a Kenmore gas stove is to make sure the gas is on. Turn the knob on the stove to the “on” position. You should hear a hissing sound as the gas is released. If you don’t hear any hissing, make sure the gas line is connected properly and that the settings on the stove are correct.
Step 2: Ignite the Gas
When the gas is on, you can ignite it by using strike-anywhere matches or a long-handled lighter. Hold the match or lighter about an inch away from the burner and then turn the knob to the “ignite” position. You should see a spark and then hear a “whoosh” as the gas ignites. If the gas does not ignite, turn the knob to the “off” position, wait a few minutes, and then try again.
Step 3: Adjust the Flame
Once the gas has ignited, you can adjust the flame. Turn the knob to the desired flame size. The flame should be steady and blue. If it’s yellow or orange, there may be a problem with the gas line or the stove. If that’s the case, turn the knob to the “off” position, wait a few minutes, and then try again.
Step 4: Monitor the Flame
Once you’ve lit the Kenmore gas stove and adjusted the flame, it’s important to monitor it. Make sure the flame doesn’t go out and that it stays at the desired size. If the flame goes out, turn the knob to the “off” position and then try to light it again.
Frequently Asked Questions
What type of matches should I use?
You should use strike-anywhere matches when lighting a Kenmore gas stove. Do not use safety matches or any other type of match.
Can I use a lighter to light the stove?
Yes, you can use a long-handled lighter to ignite the gas on your Kenmore gas stove.
What should the flame look like?
Once the gas is lit, the flame should be steady and blue. If it’s yellow or orange, there may be a problem with the gas line or the stove.
What should I do if the flame goes out?
If the flame goes out, turn the knob to the “off” position and then try to light it again.
Do I need to open windows or doors when lighting the stove?
Yes, you should open any windows or doors in the kitchen to ensure proper ventilation before lighting the stove.
Do I need to remove any jewelry when lighting the stove?
Yes, it’s important to remove any jewelry that could spark when you’re lighting the stove.
How often should I monitor the flame?
You should monitor the flame regularly to make sure it stays lit and at the desired size.
What should I do if I can’t get the gas to ignite?
If you can’t get the gas to ignite, turn the knob to the “off” position, wait a few minutes, and then try again.
Can I use any type of match to light the stove?
No, you should only use strike-anywhere matches when lighting a Kenmore gas stove. Do not use safety matches or any other type of match.
Do I need to wear protective clothing when lighting the stove?
Yes, you should wear clothing that can’t catch fire when lighting the stove.
Do I need to adjust the flame after it has been lit?
Yes, you can adjust the flame by turning the knob to the desired flame size.
Can I use a short-handled lighter to light the stove?
No, you should use a long-handled lighter when lighting a Kenmore gas stove.
What should I do if the flame is yellow or orange?
If the flame is yellow or orange, there may be a problem with the gas line or the stove. If that’s the case, turn the knob to the “off” position, wait a few minutes, and then try again.