Whether you've forgotten the combination to your Kryptonite bike lock or you've simply lost the key, there are ways to reset the lock without having to break it or use a locksmith. Resetting a Kryptonite bike lock is an easy task as long as you know the right steps to follow. Read on to find out how.
What You'll Need
Before you get started, you'll need a few supplies: a flathead screwdriver, a Phillips-head screwdriver, and a paperclip. If you don't have the appropriate screwdrivers, you can purchase them from your local hardware store.
Steps to Resetting the Lock
To reset the lock, follow these steps:
1. Unscrew the Casing
Using the flathead screwdriver, carefully unscrew the casing of the lock. Be gentle when doing this as you don't want to damage the lock.
2. Locate the Reset Button
Once you have the casing off, you should be able to locate the reset button. It's usually located on the side of the lock, near the number dial.
3. Press the Reset Button
Using the Phillips-head screwdriver, press the reset button. You should hear a "click" once the button is pressed.
4. Enter the New Combination
Once the reset button has been pressed, you can now enter your new combination. Use the paperclip to turn the dials until you have the combination set.
5. Test the Combination
Once you have the combination set, test it by turning the dials and see if it unlocks. If it does, you have successfully reset the lock.
6. Reattach the Casing
Once you have verified that the new combination works, reattach the casing with the flathead screwdriver.
Frequently Asked Questions
Q: Do I need any specialized tools to reset the lock?
A: You will need a flathead and Phillips-head screwdriver as well as a paperclip.
Q: Is it possible to reset the lock without a paperclip?
A: No, you will need a paperclip to reset the lock.
Q: Do I need to use the same combination that was previously set?
A: No, you can enter a new combination when resetting the lock.
Q: What should I do if the lock doesn't open after resetting it?
A: If the lock doesn't open after resetting it, try entering the combination again. If it still doesn't work, you may need to take it to a locksmith.
Q: Can I reset the lock without a screwdriver?
A: No, you will need a screwdriver to open the casing of the lock.
Q: How do I know if the reset has been successful?
A: You will know the reset has been successful if the lock opens with the new combination.